Home Laser Diode Controllers and Mounts Driver for UV light emitting diodes, QDUV-30

Driver for UV light emitting diodes, QDUV-30

Driver for UV light emitting diodes, QDUV-30
Online price: $190.00
Quantity: 10+ Items
List price: $170.00
*Note:
    • Driver for operating ultraviolet light emitting
        diodes (UVTOP LEDs), in CW mode
    • Continuously adjustable current from 0 to 30mA
    • Compliance voltage 10V
    • High stability, better than 1% over 12 hours
    • 100-240V AC adapter and connecting cables included
    • Three pin socket for LEDs in TO-39, TO-18,
         and TO-46 packages included

     

Details
Lead time IN STOCK
 
Options
Quantity:

Specifications

 

Parameter

Typ

Max

Unit

Maximum operating current

 

30

mA

Stability of current

1

 

%

DC Voltage to the driver

 

12

V

DC Current to the driver

 

1

 A

Supply voltage

110

240

V

Power consumption

 

20

W

Size

120x65x30

 

mm

LED fixture cable length

70

 

cm

 

 

Pin Configuration

Instruction Manual

Setup

1.      Connect the 12V DC to the receptacle on the left side of the controller box.

2.      Connect the fixture cable to the receptacle “LED” on the right side the controller box.

3.      Confirm that the potentiometer labeled “Current” is fully counter-clockwise to 0mA position.

4.      Insert the diode in to the fixture head of the cable, in accordance polarity. 

 

Operation

1.      Toggle the “Power” switch up to the “On” position.

2.      Rotate the “Current” potentiometer clockwise to the desired value, up to 30mA in this model.

3.      Once the operation is complete, rotate “Current” counter-clockwise back to 0mA

4.      Turn of the “Power” down to the “Off” position.

5.      Safe to remove diode from the fixture of the cable.

Additional information

A more powerful UV LED driver with output current up to 200mA for operating UV CLEAN sources is available here.

: *
: *
: *
 
pins
There have been no reviews