Specifications
Test conditions: CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink.
| Parameters | Min. | Typ. | Max. | Unit |
| Operating current (Iop) | 1000 | 1250 | mA | |
| Forward voltage @ Iop | 1.6 | 2 | V | |
| Gain | ||||
| Small signal gain¹ ² | 18 | 22 | dB | |
| Gain mean wavelength¹ | 1330 | 1340 | 1355 | nm |
| Gain bandwidth¹ @ -3dB | 18 | 25 | nm | |
| Gain saturation output power² @ -3dB | 11 | 15 | dBm | |
| Noise figure³ *** | 7 | dB | ||
| ASE | ||||
| ASE optical power ex fiber | 0.5 | 1 | mW | |
| ASE mean wavelength | 1315 | nm | ||
| ASE bandwidth @ -3dB | 25 | nm | ||
| ASE** spectrum ripples³ | 0.1 | 0.2 | dB | |
| ASE polarization extinction ratio | 13 | 16 | dB | |
| Polarization | TE | |||
¹ at -25dBm input optical power
² at wavelength of gain maximum
³ at wavelength of ASE maximum (RMS in 1nm range, 10pm resolution)
* without input light
** from output port
*** NF=10log10(2ρASE/Ghν) [D.Baney et al., Optical Fiber Techn. 6, 122 (2000)]
Absolute Maximum Rating
| Parameters | Min. | Max. | Unit |
| SOA reverse voltage | 2 | V | |
| SOA CW forward current | 1500 | mA | |
| Ouput optcial power | 200 | mW | |
| Input optical power | 15 | dBm | |
| Thermo Electric Cooler current | 3 | A | |
| Thermo Electric Cooler voltage | 4 | V | |
| Fiber bend radius | 3 | cm | |
| Chip operating temperature range | 5 | 50 | °C |
| Case operating temperature range | 0 | 50 | °C |
| Storage temperature range | 0 | 50 | °C |
| Pin Soldering Temperature (max 10 sec, max case temperature 120°C) | 300 | °C | |
| Fiber Band Radius | 3 | cm |
Thermistor Specification
| Parameters | Value | Unit |
| Thermistor Type | NTC | - |
| Resistance at 25deg. C | 10+/-0.1 | kOhm |
| Beta (0-50 deg. C) | 3435+/-1% | K |
Spectrum
Test conditions: CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink.
(Note: TYPICAL PERFORMANCE for reference only, performance may vary from device to device and in different signal condition and usage. )
Pin Configuration
TOP VIEW (unit in mm)
Additional information
- Call, email or click on the add to cart button to get current lead time.
- By default the fiber pigtails are bare fiber with coating (buffer) diameter 245+/-15um. Loose tube is optional, please contact for price.
- For PM fiber coupled SOA, "key aligned FC/APC connector" is narrow key type with its key aligned to slow axis of the PM fiber and the polarization of the output.
NEW PRODUCTS (90)
Deep UV light emitting diodes
Free Space Laser Diodes
Fiber Coupled Laser Diodes (5)
Broadband Light Sources
High Power Pump Laser Diode Modules (5)
Turnkey Fiber Coupled Laser / LED Sources (5)
Semiconductor Optical Amplifiers (52)
InGaAs PIN Photodiodes (9)
Laser Diode Controllers and Mounts (13)
