Home Semiconductor Optical Amplifiers Semiconductor optical amplifier, 300mW @ 1310nm, QBOAI-1310
Printable version

Semiconductor optical amplifier, 300mW @ 1310nm, QBOAI-1310

Semiconductor optical amplifier, 300mW @ 1310nm, QBOAI-1310
Specifications Spectrum Pin Configuration Additional information
Online price: $3900.00
    • High output power boost amplifier, >300mW @ 1310nm
    • Proprietary anti-reflection coating technology enabling high reliability
    • Polarization maintaining PM1300 fiber or HI1060 fiber
    • Broad band (1295-1320nm) gain
    • Strong linear polarization
    • RoHS compliance
Details
Weight 0.10 lbs
Lead time 6-7 weeks ARO
 
Options
Select Connectors:
Fiber type
Quantity:

Specifications

Test conditions: CW operation, 2000mA, chip temperature 25°C, input signal 10dBm, the case mounted on room temperature heatsink.

Parameters Min. Typ. Max. Unit
Operating current (Iop)   2000 3000 mA
Forward voltage @ Iop   1.8 2.3 V
Input optyical power -25 10 15 dBm
Gain
Forward current @ 300mW     3000 mA
Saturation output power @ -3dB 16 20   dBm
Gain 12 16   dB
Small signal gain @ Pin=-20dBm 33 37   dB
Gain peak wavelength 1295 1310 1320 nm
Bandwidth @ -3dB   70   dBm
Noise figure* @ 1A; Pin=-20dBm   6   dB
ASE
ASE optical power ex fiber (either port)   70   mW
ASE mean wavelength   1230   nm
ASE bandwidth @ -3dB   16   nm
ASE spectrum ripples**   0.02 0.1 dB
ASE polarization extinction ratio*** 14 18   dB

* NF=10log10(2ρASE/Ghν) [D.Baney et al., Optical Fiber Techn. 6, 122 (2000)]

** Measured in 1nm span around spectrum maximum with 20pm resolution.

*** For PM fiber coupled, TE mode, polarization alogn slow axis

Absolute Maximum Rating

Parameters Min. Max. Unit
Output optical power   800 mW
Input optical power   20 dBm
SOA CW forward current   3500 mA
Reverse voltage   2 V
Thermo Electric Cooler current   3 A
Thermo Electric Cooler voltage   4 V
Fiber bend radius 3   cm
Chip operating temperature 5 50 °C
Case operating temperature range 0 50 °C
Storage temperature range 0 50 °C
Pin Soldering Temperature (max 10 sec, max case temperature 120°C)   300 °C

 

Thermistor Specification

Parameters Value Unit
Thermistor Type NTC -
Resistance at 25deg. C 10+/-0.1 kOhm
Beta (0-50 deg. C) 3375+/-1% K

 

Spectrum

Test conditions: CW operation, chip temperature 25°C, the case is mounted on room temperature heatsink.

(Note: TYPICAL PERFORMANCE for reference only, performance may vary from device to device and in different signal condition and usage. )

Pin Configuration

TOP VIEW (unit in mm)


Additional information

Call, email or click on the add to cart button to get current lead time.

For PM fiber coupled SOA, "key aligned FC/APC connector" is narrow key type with its key aligned to slow axis of the PM fiber and the polarization of the output. 

: *
: *
: *
 
There have been no reviews

Add your own review