| Online price: $760.00 | ||||
|
Specifications
Computer controlled operation – via provided software control application
Built-in USB port – required for initial configuration and computer controlled operation
|
Parameter |
Min |
Typ. |
Max |
Units |
|
Power supply voltage |
4.8 |
5 |
5.2 |
V |
| Power supply current | 3 | A | ||
|
LD driver output current |
|
|
2000 |
mA |
| Current regulation step | 1 | mA | ||
| Current ripple | 0.1 | % | ||
| Current stability (over 1 hour) | 0.1 | % | ||
| Current set accuracy | 1 | % | ||
| Compliance voltage | 1 | 3 | V | |
| Photodiode reading | 5 | mA | ||
| TEC current | 4 | A | ||
| TEC voltage | 1 | 4 | V | |
| TEC temerpature setting range | 5 | 50 | deg. C | |
| TEC temperature adjustment | 0.1 | deg. C | ||
|
TEC temperature accuracy |
|
0.1 |
% |
Controller board general information
| Board operating temperature range | +10 to +50 | deg. C | ||
|
Storage temperature range |
-20 to +70 |
deg. C |
||
|
Humidity, non-condensing |
<95 |
% |
||
|
Power connection |
2-pin terminal block (282836-2 TE connectivity) Interface |
|||
|
Interface connectors |
Mini-USB, Type B (1734035-1 TE |
|||
| PCB size |
85 mm x 80 mm x 24 mm
|
|||
| Weight | <160g | |||
Pin Configuration
Dimensions and pinout (unit in mm)
(Note the following drawing is the driver with 14-Pin Butterfly package ZIF socket option. If no mounting option selected, the default is PCB pads. The end user need to solder the LD on the board. )
Note this controller by default only work with LD, SLD, or SOA with butterfly type 1 pinout as below:
Please select in options dropdown menu for LD, SLD, or SOA with butterfly type 2 pinout.
Additional information
Download Driver Software.
Downlaod CAN Protocol Description.
Downlaod RS232 Protocol Description.
(After downloading, if the file name is not ending with .zip, please change it to QBLD-CW-2 ld_control_center_v3_006b.zip to open.)
- This controller set includes LD driver, temerpature controller, mount with heatsink.
- The USB cable and 5V adapter are not included.
- It can work with LED, laser diode, superluminescent diode, or semiconductor optical amplifier with matching current and voltage requirement.
- The butterfly mount come in type I pinout. It cannot be re-configured to work with devices with butterfly type 2 pinout.
NEW PRODUCTS (90)
Deep UV light emitting diodes
Free Space Laser Diodes
Fiber Coupled Laser Diodes (5)
Broadband Light Sources
High Power Pump Laser Diode Modules (5)
Turnkey Fiber Coupled Laser / LED Sources (5)
Semiconductor Optical Amplifiers (51)
InGaAs PIN Photodiodes (8)
Laser Diode Controllers and Mounts (13)
