Home Laser Diode Controllers and Mounts Laser diode driver with temperature controller and mount, QCombo-6310
Printable version

Laser diode driver with temperature controller and mount, QCombo-6310

Laser diode driver with temperature controller and mount, QCombo-6310
Controller manual Butterfly 203/5 manual DIL 212/4 manual To Can 224 manual Specifications Pin Configuration Additional information
Online price: $3600.00
    • Operating current up to 1000mA
    • Compliance voltage up to 10V
    • Precise and stable temperature control
    • Modulation up to 200kHz
    • Mount for laser diode included (select in options)
    • Connecting cables also included
    • USB/RS232 computer interface
    • FREE ArroyoControl software for Windows
Details
Lead time IN STOCK
 
Options
Mount
Cable to PC
Quantity:

Specifications

    Laser Driver 1A, 10 Volt
    Temperature Controller 5 Amp, 12 Volt, 60 Watt
   
Laser Driver  
   
LASER CURRENT  
    Range (mA) 0 – 1000
    Resolution (mA) 0.05
    Setpoint Accuracy (±[% set + mA]) 0.025% + 0.3
    Measurement Accuracy (±[% reading + mA]) 0.025% + 0.3
    Stability (ppm, time) < 10, 1 hour
    Temperature Coeff (ppm/°C) 50
    Noise/Ripple (μA rms, low BW) < 2.5
    Transients (μA) < 200
    Compliance Voltage (V) 10
    Modulation Bandwidth (kHz) 200
    Modulation Input Range 0 – 10V, 10kΩ
   
PHOTODIODE CURRENT  
    Range (μA) 5 – 5,000
    Resolution (μA) 0.1
    Setpoint Accuracy (±[% set+μA]) 0.05% + 1
    Measurement Accuracy (±[% reading+μA]) 0.05% + 1
    Stability (ppm, time) < 200, 24 hours
    Temperature Coeff (ppm/°C) < 200
    PD Bias (V) 0 to -5V, software programmable
   
LASER VOLTAGE  
    Range (V) 0 – 10
    Resolution (V) 0.001
    Setpoint Accuracy (±[% set+V]) 0.05% + 0.005
    Measurement Accuracy (±[% reading+V]) 0.05% + 0.005
    Stability (ppm, time) < 50, 1 hour
    Temperature Coeff (ppm/°C) < 100
    Four-wire Measurement Yes
   
LIMITS  
    Current Limit Accuracy (mA) 10
    Voltage Limit Accuracy (±% FS) 2.50%
   
   
Temperature Controller  
    Power (A, V, W) ±5A, ±12V, 60W
    Stability (1 hour, °C) 0.002
    Stability (24 hours, °C) 0.005
   
Temperature  
    Range (°C) -99 to 250
    Resolution (°C) 0.01
Thermistor (100µA) Accuracy at 25°C (°C) 0.03
    AD590 Accuracy at 25°C (°C) 0.9
    LM335 Accuracy at 25°C (°C) 0.9
    RTD Accuracy at 25°C (°C) 0.35
    Thermistor, 100µA Range  
    Accuracy (±[% reading + kΩ]) 0.05 + 0.005
    Range (kΩ) 0.02 – 45
    Resolution (kΩ) 0.001
    Thermistor, 10µA Range  
    Accuracy (±[% reading + kΩ]) 0.05 + 0.05
    Range (kΩ) 0.2 – 450
    Resolution (kΩ) 0.01
    LM335  
    Accuracy (±[% reading + mV]) 0.3 + 0.1
    Range (mV) 1730 – 4730
    Resolution (mV) 0.1
    Bias (mA) 1
    AD590  
    Accuracy (±[% reading + µA]) 0.03 + 0.1
    Range (μA) 173 – 473
    Resolution (μA) 0.01
    Bias (V) 4.5
    RTD  
    Accuracy (±[% reading + Ω]) 0.03 + 0.1
    Range (Ω) 20 – 192
    Resolution (Ω) 0.01
    Bias (mA) 1
   
Current  
    Range (A) ±5
    Compliance Voltage (V) 12
    Max Power (W) 60
    Resolution (A) 0.01
    Accuracy (±[% value + A]) 0 + 0.03
    Noise/Ripple (A, rms) < 0.005
    Current Limit Accuracy (A) 0.05
   
Voltage (measurement only)  
    Accuracy (±[% reading + V]) 0 + 0.05
    Range (V) ±12
    Resolution (V) 0.01
   
General  
    Laser Connector DB-9, female
    TEC Connector DB-15, female
    Display Type 4x20 VFD
    Computer Interface USB 2.0 Full Speed (USB Type B),
  RS-232 (DB-9, male)
Power 100V / 120V / 230V; 50/60 Hz
    Size (H x W x D) [inches (mm)] 3.5 (90) x 8.5 (215) x 12 (305)
    Operating Temperature +10°C to +40°C
    Storage Temperature -20°C to +60°C

 

Pin Configuration

 

Additional information

  • Either 14pin DIL mount, or 14-pin butterfly mount is included with the controller. If purchased together, this controller will be shipped preconfigured and pretested with laser diode, LED, superluminescent diode, or semiconductor optical amplifier as a complete turn-key system.
  • The controller set is only available for purchasing with laser diode, LED, superluminescent diode, or semiconductor optical amplifier.
  • Details of available mounts for devcies in 14-pin DIL or 8-pin Mini-DIL package:
  1. DIL mount  without built-in TEC, 212.
  2. DIL mount with built-in TEC, 214.
  • Details of available mounts for devices in 14-pin butterfly package:
  1. Butterfly mount without built-in TEC, 203.
  2. Butterfly mount with built-in TEC, 205.
  3. High power mount with built-in TEC, 207. Compatible package include standard Butterfly, AlfaLight AM6, JDSU L3 (2-pin), JDSU L4, Lumics LU09, Scheaumann SP940, Star LED’s.
  • Details of available mounts for devices in TO Can package:
  1. TO-Can mount for devices in 5.6mm or 9mm TO Can package with built-in TEC, 224.
  2. LED mount for STAR LED package with built-in TEC, 226.
  3. High power TO-Can mount for devices in 5.6mm, 9mm, 2-pin TO Can package with built-in TEC, 224.
  4. Micro 5.6 mount for devices in 5.6mm TO Can package without built-in TEC, TO-5.6.
  5. Micro 9.0 mount for devices in 5.6mm TO Can package without built-in TEC, TO-9.
  • Details of other accesories:
  1. RS-232 cable, 1200.
  2. USB cable, 1201.

Following accesories can be added into note section upon ordering. The prices will be adjusted manually when we process your order.

  • Details of available accesories for butterfly mounts 203, 205, and 207:
  1. Laser Cover, 200-C, (+$55).
  2. Fiber Management Tray, 200-TRAY, (+$95).
  3. Fan Base, 200-FAN, (+$125).
  • Details of available accesories for TO Can mounts 224:
  1. Standard cover, 30mm cage support, 224-C-01, (+$35).
  2. Opto-mech cover, 30mm cage and 1" lens tube, 224-C-02, (+$35).
  3. Cover for fiber pigtailed (co axial package) diodes, 224-C-03, (+$35).
  • Details of available accesories for TO Can mounts 234:
  1. Opto-mech cover, 30mm cage and 1" lens tube, 234-C-02,(+$45).
: *
: *
: *
 
There have been no reviews

Add your own review