Controller manual
Butterfly 203/5 manual
DIL 212/4 manual
TO Can 224 manual
Specifications
Pin Configuration
Additional information
Online price: $3450.00 |
Specifications
Laser Driver | 500mA / 250mA, 10 Volt |
Temperature Controller | 5 Amp, 12 Volt, 60 Watt |
Laser Driver | |
LASER CURRENT | |
Range (mA) | 0 – 500 or 0 – 250 |
Resolution (mA) | 0.01 |
Setpoint Accuracy (±[% set + mA]) | 0.025% + 0.12 |
Measurement Accuracy (±[% reading + mA]) | 0.025% + 0.12 |
Stability (ppm, time) | < 10, 1 hour |
Temperature Coeff (ppm/°C) | 50 |
Noise/Ripple (μA rms, low BW) | < 1.5 |
Transients (μA) | < 100 |
Compliance Voltage (V) | 10 |
Modulation Bandwidth (kHz) | 325 |
Modulation Input Range | 0 – 10V, 10kΩ |
PHOTODIODE CURRENT | |
Range (μA) | 2 – 5,000 |
Resolution (μA) | 0.1 |
Setpoint Accuracy (±[% set+μA]) | 0.05% + 1 |
Measurement Accuracy (±[% reading+μA]) | 0.05% + 1 |
Stability (ppm, time) | < 200, 24 hours |
Temperature Coeff (ppm/°C) | < 200 |
PD Bias (V) | 0 to -5V, software programmable |
LASER VOLTAGE | |
Range (V) | 0 – 10 |
Resolution (V) | 0.001 |
Setpoint Accuracy (±[% set+V]) | 0.05% + 0.005 |
Measurement Accuracy (±[% reading+V]) | 0.05% + 0.005 |
Stability (ppm, time) | < 50, 1 hour |
Temperature Coeff (ppm/°C) | < 100 |
Four-wire Measurement | Yes |
LIMITS | |
Current Limit Accuracy (mA) | 5 |
Voltage Limit Accuracy (±% FS) | 2.50% |
Temperature Controller | |
Power (A, V, W) | ±5A, ±12V, 60W |
Stability (1 hour, °C) | 0.002 |
Stability (24 hours, °C) | 0.005 |
Temperature | |
Range (°C) | -99 to 250 |
Resolution (°C) | 0.01 |
Thermistor (100µA) Accuracy at 25°C (°C) | 0.03 |
AD590 Accuracy at 25°C (°C) | 0.9 |
LM335 Accuracy at 25°C (°C) | 0.9 |
RTD Accuracy at 25°C (°C) | 0.35 |
Thermistor, 100µA Range | |
Accuracy (±[% reading + kΩ]) | 0.05 + 0.005 |
Range (kΩ) | 0.02 – 45 |
Resolution (kΩ) | 0.001 |
Thermistor, 10µA Range | |
Accuracy (±[% reading + kΩ]) | 0.05 + 0.05 |
Range (kΩ) | 0.2 – 450 |
Resolution (kΩ) | 0.01 |
LM335 | |
Accuracy (±[% reading + mV]) | 0.3 + 1 |
Range (mV) | 1730 – 4730 |
Resolution (mV) | 0.1 |
Bias (mA) | 1 |
AD590 | |
Accuracy (±[% reading + µA]) | 0.03 + 0.1 |
Range (μA) | 173 – 473 |
Resolution (μA) | 0.01 |
Bias (V) | 4.5 |
RTD | |
Accuracy (±[% reading + Ω]) | 0.03 + 0.1 |
Range (Ω) | 20 – 192 |
Resolution (Ω) | 0.01 |
Bias (mA) | 1 |
Current | |
Range (A) | ±5 |
Compliance Voltage (V) | 12 |
Max Power (W) | 60 |
Resolution (A) | 0.01 |
Accuracy (±[% value + A]) | 0 + 0.03 |
Noise/Ripple (A, rms) | < 0.005 |
Current Limit Accuracy (A) | 0.05 |
Voltage (measurement only) | |
Accuracy (±[% reading + V]) | 0 + 0.05 |
Range (V) | ±12 |
Resolution (V) | 0.01 |
General | |
Laser Connector | DB-9, female |
TEC Connector | DB-15, female |
Display Type | 4x20 VFD |
Computer Interface | USB 2.0 Full Speed (USB Type B), |
RS-232 (DB-9, male) | |
Power | 100V / 120V / 230V; 50/60 Hz |
Size (H x W x D) [inches (mm)] | 3.5 (90) x 8.5 (215) x 12 (305) |
Operating Temperature | +10°C to +40°C |
Storage Temperature | -20°C to +60°C |
Pin Configuration
Additional information
- Either 14pin DIL mount, or 14-pin butterfly mount is included with the controller. If purchased together, this controller will be shipped preconfigured and pretested with laser diode, LED, superluminescent diode, or semiconductor optical amplifier as a complete turn-key system.
- The controller set is only available for purchasing with laser diode, LED, superluminescent diode, or semiconductor optical amplifier.
- Details of available mounts for devcies in 14-pin DIL or 8-pin Mini-DIL package:
- Details of available mounts for devices in 14-pin butterfly package:
- Butterfly mount without built-in TEC, 203.
- Butterfly mount with built-in TEC, 205.
- High power mount with built-in TEC, 207. Compatible package include standard Butterfly, AlfaLight AM6, JDSU L3 (2-pin), JDSU L4, Lumics LU09, Scheaumann SP940, Star LED’s.
- Details of available mounts for devices in TO Can package:
- TO-Can mount for devices in 5.6mm or 9mm TO Can package with built-in TEC, 224.
- LED mount for STAR LED package with built-in TEC, 226.
- High power TO-Can mount for devices in 5.6mm, 9mm, 2-pin TO Can package with built-in TEC, 224.
- Micro 5.6 mount for devices in 5.6mm TO Can package without built-in TEC, TO-5.6.
- Micro 9.0 mount for devices in 5.6mm TO Can package without built-in TEC, TO-9.
- Details of other accesories:
Following accesories can be added into note section upon ordering. The prices will be adjusted manually when we process your order.
- Details of available accesories for butterfly mounts 203, 205, and 207:
- Details of available accesories for TO Can mounts 224:
- Standard cover, 30mm cage support, 224-C-01, (+$35).
- Opto-mech cover, 30mm cage and 1" lens tube, 224-C-02, (+$35).
- Cover for fiber pigtailed (co axial package) diodes, 224-C-03, (+$35).
- Details of available accesories for TO Can mounts 234:
- Opto-mech cover, 30mm cage and 1" lens tube, 234-C-02,(+$45).